ورق مس نیکل شده

Anti Oxidizing Width 600mm Single Side Tin Plated Copper Foil 1. Description Copper product is easy to oxidation when expose in the air and form verdigris. Verdigris can cause large resistance, poor conductivity and power transmission loss. Tin plated copper product due to tin itself characteristics can form stannic oxide thin films to prevent further oxidation. Tin can also form a similar film in halogens so that the tin plated copper product has well corrosion resistance

Double Sided Thickness 0.01mm Tin Plated Copper Foil 1. Description Tin-cladded copper foil mainly solved surface un-smoothly and thickness un-even when ordinary copper foil is tinned. It has high peel strength on the laminated surface due to some special treatment. Also the whole process were done in room temperature and would not change metal structure. 2. Capacity: Thickness of tin according to customers’ requirement; Single side laminating also ok. Laminating layer

Single Side Rolled Thickness 0.035mm Nickel Plated Copper Foil 1. Description Nickel has strong passivation ability because its high stability in the air. It can form a very thin passivation film in the air which can resist atmospheric alkali and some acid corrosion. It makes nickel plated product with good chemical stability during working or under alkaline environment. Nickel plated product is not easy to change color and can be oxidized when the temperature is above 600℃

Double Sided Electrolytic Nickel Plated Copper Sheet For Battery 1. Base Material Width Range: We can produce different width Nickel copper foil . The width width is less than 600mm. Also ,we can slit different widths for customers. 2. Base Material Temper: According to customer requirements, we can produce soft ,and hard products. The temper refers to the base material. Because the nickel is pated on the surface of RA copper foil. 3. Application: 1) Shielding material for

0.012mm Single Side Decorate Nickel Plated Copper Foil Description Single side Nickel plated copper foil mean one side is copper and the other side plated with Nickel. It can be used for copper tape. Because Nickle is not easy to oxidate. Due to the high surface hardness of nickel plating product, electroplating nickel crystal is extremely small and has highly polished which can polish to mirror surface appearance. And it can keep clean for a long time in the atmosphere. So